2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

1970 CHEVELLE LS6 ENGINE (REFURBISHED READY TO INSTALL) RARE SOLID LIFTER 454

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

1970 CHEVELLE LS6 ENGINE (REFURBISHED READY TO INSTALL) RARE SOLID LIFTER 454 For Sale

It’s easy to obtain an great second-hand Chevrolet engine for sale at Used Engine Finder. In order to get the finest bargain on the best substitute engine for your needs, we allow you to reach out to a group of Chevrolet engine importers & salvage yards promptly.

You don’t need to spend time comparing prices when you’ve got Used Engine Finder at your disposal. We only require information about what exactly you need, and our merchantswill get back to you with quotes. And because we deal directly with them, you can be sure you’re getting the best price.


So don’t throw away anymore time and make use of Used Engine Finder to find the perfect engine for your Chevrolet.

  • Save time and cash by using Used Engine Finder to get the ideal used motor.
  • Receive prices from several of our trusted engine shops.
  • By negotiating direct with engine manufacturers, you can be certain you’re obtaining the cheapest price possible.
  • You may find engines for just about any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.