2009-2014 Acura TL SH-AWD 3.7L Used Engine
*Image for illustrative purposes only.

1993-1995 BMW 325is E36 3-Series 2.5L Inline 6 Engine Motor 139,690 Miles M50

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

1993-1995 BMW 325is E36 3-Series 2.5L Inline 6 Engine Motor 139,690 Miles M50 For Sale

If you’re in the marketplace for getting a good second-hand BMW engine for sale, look no further than Used Engine Finder. We will allow you to quickly contact a a network of BMW junkyards and engine importers, so you can get the best price for the most suitable 2nd hand engine for you.

With Used Engine Finder, there’s no need to lose time searching. Merely let us know what you’re looking for and our junk yards will respond with numerous prices. Our direct relationship with the vendor helps to ensure that we are able to offer you the perfect pricing.


So don’t waste any more time and use Used Engine Finder to find the perfect engine for your BMW.

  • Used Engine Finder will let you save time and money by locating the optimal engine for your BMW.
  • Receive quotes from a number of our reliable engine shops.
  • The greatest prices may be acquired by dealing directly with engine suppliers.
  • You may find engines for any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.