*Image for illustrative purposes only.

2004 Silv C2500 USED 6.0 Gas LQ4 w 4L80 2wd 231k! HOTROD 25517

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

2004 Silv C2500 USED 6.0 Gas LQ4 w 4L80 2wd 231k! HOTROD 25517 For Sale

If you happen to be in the marketplace for locating a top notch used GMC engine for sale, take a look at Used Engine Finder. To be able to obtain the greatest bargain on the best used motor for your requirements, we make it possible for you to reach out to a group of GMC engine importers & junk yards instantly.

Trying hard to find a motor is no longer necessary merit to Used Engine Finder. Just let us know what you’re trying to find, and our shops get you numerous prices. Our direct relationship with the vendor helps to ensure that we are able to provide you with the best possible prices.

So do not hold out any more, find your perfect engine today with Used Engine Finder.

  • When searching for a replacement engine, save time as well as money by utilizing Used Engine Finder.
  • Receive numerous prices from our trusted businesses.
  • By negotiating direct with engine manufacturers, you can be certain you’re getting the lowest price feasible.
  • Find motors for any and all vehicles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.