2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

2005 Volvo Xc90 T6 Engine Assembly B6294T

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2005 Volvo Xc90 T6 Engine Assembly B6294T For Sale

Used Engine Finder is the better spot to locate a high-quality Volvo motor for sale. We let you instantly get in touch with a community of Volvo vehicle dismantlers and engine importers, so you can find the best price for the ideal used motor for you.

With Used Engine Finder, there’s no need to spend time searching. We only require information regarding the engine you need, and our merchantswill get back to you with estimates. And since we deal directly with them, you can be sure you’re getting the best possible price.


So don’t waste anymore time and use Used Engine Finder to locate the best engine for your Volvo.

  • When looking for a replacement motor, save time and also money through the use of Used Engine Finder.
  • Get several estimates from our honest businesses.
  • The greatest prices may be obtained by working direct with engine retailers.
  • Save Time With Making Only One Query
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.