2014-2015 Acura ILX 2.0L Used Engine
*Image for illustrative purposes only.

2008 2009 2010 HONDA ODYSSEY ENGINE JDM J35A 3.5L VTEC VCM MOTOR

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2008 2009 2010 HONDA ODYSSEY ENGINE JDM J35A 3.5L VTEC VCM MOTOR For Sale

If you happen to be in the marketplace for locating a good second hand Honda motor for sale, simply visit Used Engine Finder. We let you immediately get in touch with a community of Honda vehicle dismantlers and engine importers, so you can find a very good bargain on the best 2nd hand motor for you.

Trying hard to find a motor is not necessary thanks to Used Engine Finder. Basically let us know what you’re looking for and our scrap yards will reply with multiple prices. Our direct connection with the seller helps to ensure that we can provide you with the best possible prices.


So do not delay any longer, find your perfect motor today along with Used Engine Finder.

  • Save time and money by utilizing Used Engine Finder to find the best used motor.
  • Receive several estimates from our dependable businesses.
  • By negotiating direct with engine companies, you can be sure you’re receiving the lowest price achievable.
  • Save Time With Making Only One Query
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.