2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

2009 Audi a6 4f 3,0 TDI v6 Engine Engine CDY CDYA CDYC 240 PS

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2009 Audi a6 4f 3,0 TDI v6 Engine Engine CDY CDYA CDYC 240 PS For Sale

You can get an excellent second-hand Audi engine for sale at Used Engine Finder. We will let you quickly get in touch with a network of Audi junkyards and engine importers, so you can find the best deal for the best replacement motor to suit your needs.

With Used Engine Finder, there’s no need to lose time searching. We just require details about what exactly you need, and our supplierswill respond with estimates. And since we deal directly with them, you can be certain you’re getting the best possible price.


So don’t throw away any more time and utilize Used Engine Finder to locate the ideal engine for your Audi.

  • When searching for a substitute engine, save time and money by utilizing Used Engine Finder.
  • Obtain numerous estimates from our honest suppliers.
  • By negotiating directly with engine manufacturers, it is certain you’re getting the best deal possible.
  • You may find motors for any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.