2009-2014 Acura TL SH-AWD 3.7L Used Engine
*Image for illustrative purposes only.

2009 VOLVO XC70 3.2L ENGINE MOTOR WITH 48,311 MILES

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2009 VOLVO XC70 3.2L ENGINE MOTOR WITH 48,311 MILES For Sale

Used Engine Finder is the best spot to discover a high-quality used Volvo engine for sale. We let you instantaneously contact a a network of Volvo junkyards and engine importers, so that you can find a very good price on the ideal replacement motor for you.

You don’t need to waste time comparing prices once you have Used Engine Finder at your disposal. We just need information about the engine you need, and our supplierswill respond with prices. And since we deal directly with them, you can be certain you’re obtaining the very best price.


So don’t hold out any more, find your ideal engine today with Used Engine Finder.

  • Used Engine Finder will let you save time and cash by locating the optimal motor for your Volvo.
  • Obtain quotes from a number of our honest engine suppliers.
  • Deal direct with engine traders, ensuring you receive the very best price.
  • You may find engines for just about any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.