2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

2012 2013 JEEP WRANGLER 3.6L 6cyl ENGINE ASSYMBLY 57k MILES!!! 6 MONTH WARRANTy

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2012 2013 JEEP WRANGLER 3.6L 6cyl ENGINE ASSYMBLY 57k MILES!!! 6 MONTH WARRANTy For Sale

You can obtain an good second hand Jeep motor for sale at Used Engine Finder. We will allow you to instantly get in touch with a community of Jeep salvage yards and engine importers, so that you can find the best price on the ideal used engine for you.

With Used Engine Finder, you needn’t waste time shopping around. Let us know what you’re trying to find, and our shops get you numerous costs. You can be sure you’re obtaining the best price since we work directly with them.


So don’t throw away anymore time and make use of Used Engine Finder to locate the ideal engine for your Jeep.

  • Used Engine Finder will let you save time and cash by locating the optimal motor for your Jeep.
  • Get deals from a number of our trustworthy engine sellers.
  • By negotiating directly with engine manufacturers, you can be certain you’re getting the cheapest price achievable.
  • Find motors for all brands of cars and trucks.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.