2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

2013-2015 FORD EXPLORER Engine 3.5L VIN 8 8th w/oil cooler 13 14 15; 20k1050

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2013-2015 FORD EXPLORER Engine 3.5L VIN 8 8th w/oil cooler 13 14 15; 20k1050 For Sale

You can obtain an good used Ford engine for sale at Used Engine Finder. To be able to get the best price on the best used engine for your requirements, we allow you to contact a group of Ford engine importers & junk yards instantly.

Trying hard to find an engine is not necessary merit to Used Engine Finder. We just need information about the engine you need, and our supplierswill respond with quotes. Our direct relationship with the supplier makes sure that we are able to provide you with the best possible prices.


So do not wait any more, discover your perfect motor today along with Used Engine Finder.

  • When looking for a substitute engine, save time as well as money by utilizing Used Engine Finder.
  • Get numerous bids from our reputable salvage yards.
  • By negotiating directly with engine companies, you can be sure you’re receiving the cheapest price feasible.
  • Find engines for any and all vehicles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.