2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

2016 FORD EXPLORER 3.5L CRATE ENGINE

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2016 FORD EXPLORER 3.5L CRATE ENGINE For Sale

Used Engine Finder is the greatest destination to locate a high-quality 2nd hand Ford motor for sale. We make it easy for a person to contact a database of Ford dismantlers and engine importers immediately, so you can get the very best price for the ideal substitute engine.

You needn’t spend time searching once you have Used Engine Finder available. We just need information about what you need, and our sellerswill respond with estimates. You can rest assured you’re receiving the very best price since we deal directly with them.


Search for your best Ford engine using Used Engine Finder right now!

  • Used Engine Finder may help you save time and cash by discovering the right engine for your Ford.
  • Get multiple quotes from our dependable suppliers.
  • By negotiating direct with engine manufacturers, you can be certain you’re receiving the lowest price feasible.
  • You may find motors for just about any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.