2014-2015 Acura ILX 2.4L Used Engine
*Image for illustrative purposes only.

2019 Isuzu 4HK1TC Diesel Engine, 210HP, 4 CYL, 5.2L 2020 CHEVROLET W4500

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2019 Isuzu 4HK1TC Diesel Engine, 210HP, 4 CYL, 5.2L 2020 CHEVROLET W4500 For Sale

It’s not hard to obtain an good used ISUZU motor for sale at Used Engine Finder. In order to obtain the greatest bargain on the best substitute motor for your requirements, we make it possible for you to reach out to a group of ISUZU engine importers & junk yards quickly.

With Used Engine Finder, you don’t need to lose time shopping around. Just let us know what you’re searching for, and our suppliers get you numerous prices. And because we deal directly with them, you can be certain you’re obtaining the very best price.


Look for your best ISUZU engine using Used Engine Finder right now!

  • When searching for a better engine, save time and money by making use of Used Engine Finder.
  • Get many quotes from our trustworthy vendors.
  • The greatest prices may be acquired by dealing direct with engine dealers.
  • Save Time With Making Only One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.