*Image for illustrative purposes only.

500c Engine Fiat 0.9 twinair 312a2000 – 86 HP 2012 year cost. 97.862 KM

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

500c Engine Fiat 0.9 twinair 312a2000 – 86 HP 2012 year cost. 97.862 KM For Sale

You can obtain an good second-hand Fiat engine for sale at Used Engine Finder. We will allow you to instantaneously contact a a community of Fiat autowreckers and engine importers, so that you can find a very good deal on the best 2nd hand motor for you.

Searching hard for a motor is not necessary merit to Used Engine Finder. Let us know what you’re searching for, and our traders get you numerous prices. Our direct relationship with the dealer ensures that we are able to provide you with the ideal prices.

So don’t squander any more time and make use of Used Engine Finder to locate the best engine for your Fiat.

  • Save time and cash by utilizing Used Engine Finder to find the ideal replacement engine.
  • Obtain numerous quotes from our trusted suppliers.
  • The greatest prices may be acquired by dealing directly with engine dealers.
  • Find engines for any and all cars, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.