2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

70K MILES ! 2012 Mitsubishi Lancer 2.4L Automatic 4WD CVT Transmission tested

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

70K MILES ! 2012 Mitsubishi Lancer 2.4L Automatic 4WD CVT Transmission tested For Sale

It’s not hard to locate an superb used Mitsubishi motor for sale at Used Engine Finder. We will let you instantaneously get in touch with a community of Mitsubishi salvage yards and engine importers, so that you can get the best bargain for the best 2nd hand motor for your requirements.

With Used Engine Finder, you needn’t waste time shopping around. We only need information about what exactly you need, and our scrap yardswill get back to you with estimates. And because we deal directly with them, you can be certain you’re getting the very best price.


Look for your best Mitsubishi engine using Used Engine Finder right now!

  • Save time and money by utilizing Used Engine Finder to get the ideal used engine.
  • Obtain prices from numerous of our trustworthy engine suppliers.
  • Deal directly with engine traders, making certain you receive the best price.
  • You may find motors for any and all automobiles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.