2014-2015 Acura ILX 2.4L Used Engine
*Image for illustrative purposes only.

89-92 JDM MAZDA RX7 FC 13B TURBO ROTARY ENGINE 5 SPD TRANS TESTED GARRETT A/R 60

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

89-92 JDM MAZDA RX7 FC 13B TURBO ROTARY ENGINE 5 SPD TRANS TESTED GARRETT A/R 60 For Sale

Used Engine Finder is the greatest location to find a high-quality used Mazda motor for sale. We let you quickly get in touch with a community of Mazda junkyards and engine importers, so you can find a very good price for the ideal 2nd hand engine for you.

Searching hard for a motor is no longer necessary merit to Used Engine Finder. We only require details about what you need, and our salvage yardswill get back to you with estimates. And because we deal directly with them, you can be sure you’re obtaining the very best price.


So don’t throw away anymore time and utilize Used Engine Finder to find the best engine for your Mazda.

  • When searching for an alternative engine, save time and also money by making use of Used Engine Finder.
  • Get quotes from several of our honest engine shops.
  • By negotiating direct with engine manufacturers, you can be certain you’re getting the lowest price possible.
  • You may find motors for just about any and all automobiles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.