2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

97-99 Jeep Wrangler TJ COMPLETE 4.0 ENGINE MOTOR (71,151k Miles) 6 Cylinder 4.0L

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

97-99 Jeep Wrangler TJ COMPLETE 4.0 ENGINE MOTOR (71,151k Miles) 6 Cylinder 4.0L For Sale

If you are in the marketplace for getting a excellent second-hand Jeep engine for sale, take a look at Used Engine Finder. We will allow you to promptly contact a a community of Jeep junkyards and engine importers, so that you can find the best price on the best 2nd hand engine to meet your needs.

With Used Engine Finder, you needn’t waste time searching. Just let us know what you’re trying to find, and our suppliers get you various costs. You can rest assured you’re getting the very best price since we deal directly with them.


So don’t squander any more time and utilize Used Engine Finder to discover the perfect engine for your Jeep.

  • When looking for a substitute engine, save time and also money by utilizing Used Engine Finder.
  • Get many bids from our reliable junkyards.
  • By negotiating direct with engine companies, you can be sure you’re receiving the lowest price feasible.
  • You may find engines for any and all vehicles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.