2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

Amc 304 V8 Engine

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Amc 304 V8 Engine For Sale

It’s easy to obtain an good second-hand Jeep motor for sale at Used Engine Finder. We will allow you to promptly contact a a community of Jeep salvage yards and engine importers, so that you can get the best deal for the best 2nd hand motor for your requirements.

You don’t need to spend time looking around once you have Used Engine Finder at your disposal. Let us know what you’re looking for, and our traders get you numerous rates. And because we deal directly with them, you can be certain you’re receiving the best possible price.


So don’t put it off any longer, discover your ideal motor right now with Used Engine Finder.

  • Used Engine Finder may help you save time and money by locating the optimal engine for your Jeep.
  • Get prices from numerous of our trusted engine shops.
  • The greatest deals may be acquired by dealing direct with engine suppliers.
  • Locate motors for all brands of cars.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.