2014-2015 Acura ILX 2.4L Used Engine
*Image for illustrative purposes only.

AUDI S3 GOLF R CUPRA 2.0 TFSI engine DJH 20000 miles Only 2013-2019

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

AUDI S3 GOLF R CUPRA 2.0 TFSI engine DJH 20000 miles Only 2013-2019 For Sale

Used Engine Finder is the greatest place to locate a high-quality used Audi engine for sale. In order to obtain the greatest price on the ideal substitute motor for your requirements, we make it possible for you to reach out to a community of Audi engine importers & junk yards instantly.

There’s no need to waste time comparing prices when you have Used Engine Finder at your disposal. We only need information about what exactly you need, and our engine supplierswill get back to you with estimates. You can be assured you’re receiving the best price since we work directly with them.


Look for your ideal Audi engine using Used Engine Finder now!

  • Save time and cash by utilizing Used Engine Finder to get the best replacement motor.
  • Obtain quotes from several of our honest engine suppliers.
  • By negotiating direct with engine manufacturers, it is certain you’re receiving the best deal possible.
  • Save Time With Making Only One Query
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.