*Image for illustrative purposes only.

Bmw E36 E34 Engine 2.5L M50 Long Block Single Vanos 93-95 325i 325is 325ic 525i

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Bmw E36 E34 Engine 2.5L M50 Long Block Single Vanos 93-95 325i 325is 325ic 525i For Sale

It’s easy to obtain an good second-hand BMW motor for sale at Used Engine Finder. We make it possible for you to get in touch with collection of BMW dismantlers and engine importers right away, so you can get the greatest bargain on the ideal replacement engine.

With Used Engine Finder, there’s no need to waste time comparing prices. Just let us know what you’re trying to find, and our traders get you various deals. Our direct relationship with the seller makes sure that we can provide you with the best possible prices.


So don’t squander any more time and use Used Engine Finder to find the best engine for your BMW.

  • When searching for a replacement engine, save time and also money through the use of Used Engine Finder.
  • Get quotes from numerous of our honest engine shops.
  • The greatest deals may be acquired by dealing direct with engine dealers.
  • You may find motors for just about any and all automobiles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.