*Image for illustrative purposes only.

BUICK ENCLAVE 3.6L V6 ENGINE MOTOR OEM 2018 – 2019 💠 -41K MILES-

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

BUICK ENCLAVE 3.6L V6 ENGINE MOTOR OEM 2018 – 2019 💠 -41K MILES- For Sale

It’s not hard to obtain an good second hand Buick engine for sale at Used Engine Finder. To be able to obtain the greatest price on the best used engine for your requirements, we allow you to reach out to a group of Buick engine importers & salvage yards promptly.

With Used Engine Finder, there’s no need to spend time comparing prices. We just require information regarding what you need, and our sellerswill respond with quotations. And because we deal directly with them, you can be certain you’re getting the best possible price.


Search for your best Buick engine using Used Engine Finder today!

  • Used Engine Finder may help you save time and cash by finding the right motor for your Buick.
  • Get several bids from our reputable sellers.
  • By negotiating direct with engine manufacturers, it is certain you’re getting the cheapest price possible.
  • You may find motors for just about any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.