2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

Engine 4.9L VIN Y 8th Digit Air In Manifold Fits 81-86 FORD F150 PICKUP 88113

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Engine 4.9L VIN Y 8th Digit Air In Manifold Fits 81-86 FORD F150 PICKUP 88113 For Sale

Used Engine Finder is the better location to find a high-quality used Ford motor for sale. We will let you promptly contact a a community of Ford autowreckers and engine importers, so you can find a very good deal for the most suitable replacement engine to meet your needs.

You needn’t spend time searching when you have Used Engine Finder at your disposal. We only need details about what you need, and our scrap yardswill get back to you with prices. Our direct relationship with the vendor makes sure that we can offer you the best possible pricing.


Search for your ideal Ford engine using Used Engine Finder right now!

  • Save time and cash by utilizing Used Engine Finder to discover the best used motor.
  • Obtain multiple estimates from our trusted suppliers.
  • By negotiating direct with engine manufacturers, it is certain you’re receiving the best deal feasible.
  • Find motors for any and all vehicles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.