2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

Engine 4 Door 3.2L VIN W 8th Digit 6 Cylinder Fits 2001-2004 ISUZU RODEO

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Engine 4 Door 3.2L VIN W 8th Digit 6 Cylinder Fits 2001-2004 ISUZU RODEO For Sale

It’s not hard to get an good second hand ISUZU motor for sale at Used Engine Finder. We allow anyone to get in touch with database of ISUZU dismantlers and engine importers without delay, to get the best bargain for the ideal used motor.

Trying hard to find a motor is no longer necessary thanks to Used Engine Finder. Basically let us know what you want and our suppliers will reply with numerous quotes. And because we deal directly with them, you can be certain you’re receiving the best possible price.


So do not wait any more, discover your ideal engine today along with Used Engine Finder.

  • When looking for a better motor, save time as well as money by making use of Used Engine Finder.
  • Obtain quotes from a number of our dependable engine shops.
  • By negotiating directly with engine manufacturers, you can be certain you’re receiving the best price possible.
  • You may find engines for any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.