*Image for illustrative purposes only.

Engine 5.0L VIN N 8th Digit Fits 96 BRONCO 228957

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Engine 5.0L VIN N 8th Digit Fits 96 BRONCO 228957 For Sale

If you happen to be in the market for locating a good second hand Ford engine for sale, take a look at Used Engine Finder. We let you immediately contact a a community of Ford vehicle dismantlers and engine importers, so you can find a very good bargain on the ideal 2nd hand engine for your needs.

You needn’t spend time searching once you have Used Engine Finder at your disposal. Just tell us what you’re looking for and our sellers will respond with numerous estimates. And since we deal directly with them, you can be sure you’re obtaining the very best price.


Look for your ideal Ford engine using Used Engine Finder now!

  • Used Engine Finder will let you save time and money by discovering the right motor for your Ford.
  • Get several quotes from our honest suppliers.
  • Deal direct with engine shops, ensuring you get the best price.
  • Find engines for any and all automobiles, irrespective of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.