2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

Engine 5.3L VIN C 8th Digit Opt LS4 Fits 07 IMPALA 1261974

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Engine 5.3L VIN C 8th Digit Opt LS4 Fits 07 IMPALA 1261974 For Sale

It is easy to obtain an good second-hand Chevrolet motor for sale at Used Engine Finder. In order to obtain the greatest bargain on the best used engine for your needs, we make it possible for you to contact a group of Chevrolet engine importers & salvage yards quickly.

Trying hard to find a motor is not necessary merit to Used Engine Finder. Just let us know what you’re looking for, and our shops get you numerous deals. It is certain you’re obtaining the best price since we work directly with them.


So don’t squander anymore time and utilize Used Engine Finder to find the ideal engine for your Chevrolet.

  • When searching for a replacement motor, save time as well as money through the use of Used Engine Finder.
  • Get numerous bids from our reputable salvage yards.
  • By negotiating directly with engine companies, you can be sure you’re obtaining the lowest price possible.
  • Discover engines for all brands of vehicles.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.