*Image for illustrative purposes only.

Engine Assembly VOLVO XC90 05 06 07 08 09 10 11 (V8)

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Engine Assembly VOLVO XC90 05 06 07 08 09 10 11 (V8) For Sale

If you’re in the marketplace for locating a high quality used Volvo motor for sale, look no further than Used Engine Finder. We allow anyone to speak to a database of Volvo dismantlers and engine importers without delay, to receive the best deal on the ideal replacement motor.

Looking for an engine is no longer necessary thanks to Used Engine Finder. We only need details about what exactly you need, and our junk yardswill respond with quotations. And because we deal directly with them, you can be certain you’re obtaining the very best price.


So don’t waste anymore time and utilize Used Engine Finder to locate the ideal engine for your Volvo.

  • Used Engine Finder will let you save time and cash by locating the optimal motor for your Volvo.
  • Get numerous offers from our trustworthy sellers.
  • By negotiating direct with engine manufacturers, you can be certain you’re getting the best price feasible.
  • Find motors for any and all cars, irrespective of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.