2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

Engine Fiat PUNTO 1,4 199A6000 95 PS 2008 BJ 14.218 KM

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Engine Fiat PUNTO 1,4 199A6000 95 PS 2008 BJ 14.218 KM For Sale

If you’re in the marketplace for locating a excellent used Fiat motor for sale, look no further than Used Engine Finder. We will allow you to promptly contact a a community of Fiat salvage yards and engine importers, so you can find the best bargain for the most suitable replacement motor for your requirements.

Trying hard to find a motor is not necessary thanks to Used Engine Finder. We just need details about what you need, and our sellerswill get back to you with estimates. You can be sure you’re obtaining the very best price since we deal directly with them.


So don’t waste anymore time and make use of Used Engine Finder to discover the perfect engine for your Fiat.

  • Used Engine Finder may help you save time and cash by discovering the right motor for your Fiat.
  • Get many offers from our reputable vendors.
  • By negotiating directly with engine manufacturers, you can be sure you’re getting the best price feasible.
  • You may find engines for just about any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.