*Image for illustrative purposes only.

Engine for Saab 93 9-3 YS3F E50 2,0 Petrol Z20NEL B207E 150 HP

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Engine for Saab 93 9-3 YS3F E50 2,0 Petrol Z20NEL B207E 150 HP For Sale

Used Engine Finder is the best destination to find a high-quality 2nd hand Saab motor for sale. To be able to receive the finest bargain on the ideal substitute motor for your requirements, we make it possible for you to reach out to a community of Saab engine importers & junk yards promptly.

There’s no need to spend time looking around once you have Used Engine Finder at your disposal. Just tell us what you’re looking for and our suppliers will reply with numerous quotes. Our direct relationship with the supplier ensures that we can provide you with the best possible prices.


So don’t wait any longer, find your perfect engine right now together with Used Engine Finder.

  • When searching for a replacement motor, save time as well as money through the use of Used Engine Finder.
  • Receive numerous estimates from our trusted traders.
  • The best deals may be acquired by working directly with engine suppliers.
  • You may find motors for any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.