*Image for illustrative purposes only.

Ford 351 Windsor 1987 – 1993 Remanufactured Engine Bronco

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Ford 351 Windsor 1987 – 1993 Remanufactured Engine Bronco For Sale

If you’re in the marketplace for getting a quality used Ford engine for sale, simply visit Used Engine Finder. We make it easy for anyone to contact a collection of Ford dismantlers and engine importers immediately, to get the greatest deal for the ideal used motor.

With Used Engine Finder, you needn’t waste time shopping around. We just need information about what you need, and our supplierswill respond with quotes. You can rest assured you’re obtaining the best price since we deal directly with them.


Search for your best Ford engine using Used Engine Finder now!

  • When searching for a substitute engine, save time and money through the use of Used Engine Finder.
  • Get many offers from our reputable junkyards.
  • The greatest prices may be acquired by dealing direct with engine retailers.
  • Find motors for all models and makes of cars.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.