*Image for illustrative purposes only.

JDM 94-99 Mistubishi 3000GT VR4 6G72 3.0L DOHC Twin Turbo V6 Engine Getrag 6 Spd

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

JDM 94-99 Mistubishi 3000GT VR4 6G72 3.0L DOHC Twin Turbo V6 Engine Getrag 6 Spd For Sale

Used Engine Finder is the best place to find a high-quality Mitsubishi engine for sale. To be able to get the finest bargain on the best used engine for your requirements, we allow you to reach a group of Mitsubishi engine importers & junk yards promptly.

Searching hard for a motor is not necessary thanks to Used Engine Finder. We just require information about what exactly you need, and our merchantswill get back to you with quotations. And since we deal directly with them, you can be sure you’re receiving the best possible price.

Look for your best Mitsubishi engine using Used Engine Finder today!

  • When looking for a better engine, save time as well as money by utilizing Used Engine Finder.
  • Get prices from numerous of our honest engine sellers.
  • By negotiating directly with engine companies, you can be certain you’re getting the cheapest price feasible.
  • You may find motors for any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.