2014-2015 Acura ILX Hybrid 1.5L Used Engine
*Image for illustrative purposes only.

JDM 98-05 Toyota Aristo Lexus GS300 Exhaust System Cat back 2JZGTE 2JZ Muffler

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

JDM 98-05 Toyota Aristo Lexus GS300 Exhaust System Cat back 2JZGTE 2JZ Muffler For Sale

Used Engine Finder is the best location to locate a high-quality Lexus motor for sale. We will allow you to instantaneously contact a a community of Lexus vehicle dismantlers and engine importers, so that you can find a very good deal for the best 2nd hand engine for your requirements.

There’s no need to spend time comparing prices once you have Used Engine Finder at your disposal. Let us know what you’re searching for, and our shops get you various prices. Our direct connection with the vendor makes sure that we are able to provide you with the perfect pricing.


So don’t squander anymore time and use Used Engine Finder to locate the ideal engine for your Lexus.

  • Save time and money by utilizing Used Engine Finder to get the perfect used motor.
  • Receive several prices from our trusted traders.
  • The best prices may be obtained by dealing direct with engine dealers.
  • You may find motors for just about any and all cars right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.