*Image for illustrative purposes only.

Mazda CX9 Mazda 6 3.7L Engine 79K MILES 2008 2009 2010 2011 2012 2013 2014

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Mazda CX9 Mazda 6 3.7L Engine 79K MILES 2008 2009 2010 2011 2012 2013 2014 For Sale

It’s not hard to obtain an excellent second hand Mazda engine for sale at Used Engine Finder. We make it possible for anyone to contact a collection of Mazda dismantlers and engine importers immediately, so you can get the very best price on the ideal used engine.

With Used Engine Finder, there’s no need to spend time doing your research. We only require information regarding what you need, and our junk yardswill respond with estimates. And since we deal directly with them, you can be certain you’re obtaining the best possible price.

Search for your best Mazda engine using Used Engine Finder right now!

  • Save time and money by using Used Engine Finder to get the ideal replacement engine.
  • Receive deals from a number of our dependable engine shops.
  • By negotiating direct with engine companies, it is certain you’re receiving the best deal achievable.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.