*Image for illustrative purposes only.

Motor Jeep Cherokee 2.0 CRD LAY51 – 170 HP 2014 Yr 18.038 Km

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Motor Jeep Cherokee 2.0 CRD LAY51 – 170 HP 2014 Yr 18.038 Km For Sale

Used Engine Finder is the better destination to locate a high-quality 2nd hand Jeep motor for sale. We will let you instantaneously get in touch with a community of Jeep autowreckers and engine importers, so you can get the best price on the ideal replacement motor for your requirements.

With Used Engine Finder, you needn’t lose time looking around. We just need information regarding what you need, and our merchantswill respond with quotes. And since we deal directly with them, you can be certain you’re getting the best price.


Look for your best Jeep engine using Used Engine Finder right now!

  • Save time and money by utilizing Used Engine Finder to get the ideal used motor.
  • Get multiple prices from our dependable suppliers.
  • Deal direct with engine suppliers, making certain you receive the best price.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.