2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

Nissan Versa MR18DE 1.8L Low Miles JDM Engine for 2007

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Nissan Versa MR18DE 1.8L Low Miles JDM Engine for 2007 For Sale

Used Engine Finder is the greatest place to find a high-quality 2nd hand Nissan motor for sale. To be able to obtain the best bargain on the best substitute engine for your requirements, we make it possible for you to reach a group of Nissan engine importers & salvage yards promptly.

With Used Engine Finder, there’s no need to lose time doing your research. Merely inform us what you’re looking for and our merchants will answer with several quotes. And since we deal directly with them, you can be sure you’re receiving the best price.


Look for your ideal Nissan engine using Used Engine Finder right now!

  • When searching for an alternative engine, save time as well as money by making use of Used Engine Finder.
  • Receive quotes from numerous of our trustworthy engine suppliers.
  • Deal directly with engine shops, making certain you receive the best price.
  • You may find engines for just about any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.