2014-2015 Acura MDX 3.5L Used Engine
*Image for illustrative purposes only.

Original 428 engine ford

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Original 428 engine ford For Sale

If you’re in the marketplace for getting a quality second-hand Ford motor for sale, take a look at Used Engine Finder. We will allow you to instantaneously contact a a network of Ford junkyards and engine importers, so that you can get the best bargain for the ideal used engine for your needs.

With Used Engine Finder, you don’t need to lose time looking around. Let us know what you’re searching for, and our shops get you numerous costs. You can rest assured you’re obtaining the very best price since we deal directly with them.


So don’t hold out any longer, find your ideal engine right now with Used Engine Finder.

  • Save time and cash by using Used Engine Finder to find the ideal used engine.
  • Get several prices from our trusted suppliers.
  • By negotiating direct with engine manufacturers, you can be sure you’re getting the cheapest price achievable.
  • Locate motors for all models and makes of autos.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.