*Image for illustrative purposes only.

Pontiac GTO 389 1966 WS 360hp Tripower 4spd Rebuilt Short Block

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Pontiac GTO 389 1966 WS 360hp Tripower 4spd Rebuilt Short Block For Sale

If you’re in the marketplace for finding a top notch used Pontiac engine for sale, take a look at Used Engine Finder. We allow you to instantly get in touch with a network of Pontiac vehicle dismantlers and engine importers, so that you can find the best deal for the most suitable used motor to meet your needs.

With Used Engine Finder, you needn’t waste time comparing prices. We just need information about the engine you need, and our salvage yardswill get back to you with estimates. And since we deal directly with them, you can be certain you’re obtaining the very best price.

So don’t throw away anymore time and make use of Used Engine Finder to locate the best engine for your Pontiac.

  • Used Engine Finder may help you save time and money by locating the optimal motor for your Pontiac.
  • Get many quotes from our trustworthy salvage yards.
  • By negotiating directly with engine companies, you can be sure you’re receiving the lowest price feasible.
  • You may find engines for any and all cars right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.