2009-2014 Acura TL 3.5L Used Engine
*Image for illustrative purposes only.

Porsche Audi WV BCD Engine 3.0 TFSI V6 340 BHP Complete NEW

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Porsche Audi WV BCD Engine 3.0 TFSI V6 340 BHP Complete NEW For Sale

If you are in the marketplace for getting a good second-hand Porsche motor for sale, look no further than Used Engine Finder. In order to obtain the best price on the ideal used motor for your needs, we allow you to reach a community of Porsche engine importers & salvage yards quickly.

Looking for a motor is no longer necessary merit to Used Engine Finder. We just require information about what exactly you need, and our supplierswill respond with prices. And since we deal directly with them, you can be certain you’re receiving the very best price.


So don’t throw away anymore time and use Used Engine Finder to locate the best engine for your Porsche.

  • Used Engine Finder will let you save time and cash by finding the right motor for your Porsche.
  • Receive multiple quotes from our dependable traders.
  • By negotiating directly with engine manufacturers, you can be certain you’re getting the lowest price possible.
  • You may find motors for any and all automobiles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.