2014-2015 Acura ILX 2.0L Used Engine
*Image for illustrative purposes only.

Nissan 350Z 3.5L Engine 61K Miles 2004 2005 2006

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Nissan 350Z 3.5L Engine 61K Miles 2004 2005 2006 For Sale

It’s easy to locate an excellent second-hand Nissan engine for sale at Used Engine Finder. To be able to get the best price on the ideal used engine for your needs, we allow you to contact a community of Nissan engine importers & junk yards instantly.

Searching hard for an engine is no longer necessary merit to Used Engine Finder. Let us know what you’re searching for, and our traders get you numerous rates. You can be assured you’re obtaining the very best price since we deal directly with them.


Search for your ideal Nissan engine using Used Engine Finder now!

  • Used Engine Finder may help you save time and cash by finding the right engine for your Nissan.
  • Get numerous offers from our reputable vendors.
  • The greatest deals may be obtained by dealing direct with engine retailers.
  • You may find motors for just about any and all vehicles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.