*Image for illustrative purposes only.

00 01 02 SUBARU OUTBACK H6 3.0L ENGINE JDM EZ30D EZ30

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

00 01 02 SUBARU OUTBACK H6 3.0L ENGINE JDM EZ30D EZ30 For Sale

It’s not hard to locate an good second hand Subaru motor for sale at Used Engine Finder. We let you immediately get in touch with a network of Subaru autowreckers and engine importers, so you can get the best bargain on the most suitable replacement engine to meet your needs.

With Used Engine Finder, you needn’t spend time doing your research. Merely let us know what you’re looking for and our junk yards will answer with multiple quotes. It is certain you’re getting the best price since we work directly with them.


So don’t throw away any more time and use Used Engine Finder to discover the ideal engine for your Subaru.

  • Used Engine Finder will let you save time and money by discovering the right motor for your Subaru.
  • Get numerous quotes from our reputable sellers.
  • The greatest deals may be obtained by dealing direct with engine retailers.
  • Find motors for all makes and models of automobiles.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.