2009-2014 Acura TL SH-AWD 3.7L Used Engine
*Image for illustrative purposes only.

04-05-06-07-08 JDM MAZDA RX-8 RENESIS 13B ENGINE 6 SPEED TRANS 6PORT ROTARY 1.3L

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

04-05-06-07-08 JDM MAZDA RX-8 RENESIS 13B ENGINE 6 SPEED TRANS 6PORT ROTARY 1.3L For Sale

If you’re in the market for getting a good used Mazda motor for sale, look no further than Used Engine Finder. We let you promptly contact a a community of Mazda salvage yards and engine importers, so that you can get the best deal for the best replacement engine to suit your needs.

Looking for an engine is no longer necessary thanks to Used Engine Finder. We only need information about the engine you need, and our merchantswill respond with estimates. Our direct connection with the dealer makes sure that we can offer you the perfect prices.


So do not wait around any longer, discover your perfect motor right now with Used Engine Finder.

  • When searching for a better engine, save time and money through the use of Used Engine Finder.
  • Get many quotes from our reliable junkyards.
  • Deal direct with engine businesses, ensuring you get the very best price.
  • Find motors for any and all automobiles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.