*Image for illustrative purposes only.

2003 Ford Ranger 3.0L V6 Flex Fuel FFV ENGINE MOTOR Vin “V” 185K Miles

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

2003 Ford Ranger 3.0L V6 Flex Fuel FFV ENGINE MOTOR Vin “V” 185K Miles For Sale

Used Engine Finder is the best place to find a high-quality used Ford motor for sale. In order to get the finest bargain on the best substitute motor for your needs, we make it easy for you to reach out to a community of Ford engine importers & salvage yards promptly.

You don’t need to spend time searching once you have Used Engine Finder at your disposal. Just let us know what you’re trying to find, and our traders get you numerous costs. Our direct connection with the vendor makes sure that we can offer you the ideal prices.


So do not delay any more, find your perfect engine right now together with Used Engine Finder.

  • When searching for a better engine, save time and also money through the use of Used Engine Finder.
  • Obtain several quotes from our trusted businesses.
  • Deal directly with engine traders, ensuring you get the very best price.
  • Find engines for any and all cars, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.