2014-2015 Acura ILX 2.0L Used Engine
*Image for illustrative purposes only.

2003 LINCOLN NAVIGATOR 5.4 Engine Motor Assembly 152012 Miles No Core Charge

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

2003 LINCOLN NAVIGATOR 5.4 Engine Motor Assembly 152012 Miles No Core Charge For Sale

You can obtain an good second-hand Lincoln engine for sale at Used Engine Finder. We will allow you to instantaneously contact a a community of Lincoln autowreckers and engine importers, so that you can find the best deal on the best 2nd hand motor for you.

You needn’t waste time shopping around when you have Used Engine Finder at your disposal. Merely inform us what you want and our engine suppliers will reply with numerous quotes. You can be positive you’re receiving the very best price since we deal directly with them.


So don’t delay any longer, find your ideal engine right now together with Used Engine Finder.

  • Used Engine Finder may help you save time and cash by discovering the right engine for your Lincoln.
  • Receive several estimates from our honest suppliers.
  • The greatest deals may be obtained by dealing direct with engine retailers.
  • Find motors for all makes and models of autos.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.