*Image for illustrative purposes only.

2009 2010 Ford Explorer Engine Motor 4.0L Vin E 8th Digit SOHC With Oil Cooler

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

2009 2010 Ford Explorer Engine Motor 4.0L Vin E 8th Digit SOHC With Oil Cooler For Sale

Used Engine Finder is the better location to discover a high-quality Ford engine for sale. We will let you immediately contact a a network of Ford vehicle dismantlers and engine importers, so that you can find the best price on the ideal used motor to suit your needs.

Searching hard for an engine is no longer necessary merit to Used Engine Finder. We only require information regarding the engine you need, and our sellerswill respond with quotations. And since we deal directly with them, you can be sure you’re receiving the best possible price.

So don’t squander anymore time and use Used Engine Finder to find the ideal engine for your Ford.

  • Save time and money by using Used Engine Finder to discover the ideal used engine.
  • Get prices from numerous of our honest engine shops.
  • By negotiating directly with engine manufacturers, you can be sure you’re getting the cheapest price achievable.
  • Find motors for any and all automobiles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.