*Image for illustrative purposes only.

3.5L V6 Toyota 2GR-FE Engine Dropout Assembly A132E6398NM Lotus Evora

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

3.5L V6 Toyota 2GR-FE Engine Dropout Assembly A132E6398NM Lotus Evora For Sale

It’s not hard to locate an great second-hand Lotus engine for sale at Used Engine Finder. To be able to receive the greatest price on the ideal substitute motor for your requirements, we make it possible for you to reach a community of Lotus engine importers & junk yards instantly.

You don’t need to spend time comparing prices when you have Used Engine Finder at your disposal. We only need details about the engine you need, and our salvage yardswill get back to you with prices. You can be sure you’re receiving the very best price since we deal directly with them.


Look for your ideal Lotus engine using Used Engine Finder today!

  • When looking for a substitute motor, save time and money through the use of Used Engine Finder.
  • Get quotes from numerous of our dependable engine shops.
  • Deal direct with engine suppliers, ensuring you get the very best price.
  • Find engines for any and all automobiles, irrespective of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.