2014-2015 Acura ILX Hybrid 1.5L Used Engine
*Image for illustrative purposes only.

5.0 COYOTE ENGINE 6 SPEED MANUAL TRANSMISSION PULLOUT DROP OUT MUSTANG GEN 1

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

5.0 COYOTE ENGINE 6 SPEED MANUAL TRANSMISSION PULLOUT DROP OUT MUSTANG GEN 1 For Sale

If you are in the marketplace for locating a excellent used Ford motor for sale, simply visit Used Engine Finder. We allow you to quickly get in touch with a network of Ford salvage yards and engine importers, so you can get the best bargain on the best 2nd hand motor for you.

Looking for an engine is not necessary merit to Used Engine Finder. We only need information regarding the engine you need, and our junk yardswill get back to you with quotes. And since we deal directly with them, you can be certain you’re obtaining the very best price.


Look for your best Ford engine using Used Engine Finder today!

  • Used Engine Finder may help you save time and money by discovering the right engine for your Ford.
  • Receive several prices from our dependable traders.
  • By negotiating direct with engine manufacturers, you can be sure you’re obtaining the cheapest price possible.
  • You may find motors for any and all automobiles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.