*Image for illustrative purposes only.

Complete Engine For MITSUBISHI Lancer Saloon/Ffamiliar CB0AW 1.6 16V Cat 4G92

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Complete Engine For MITSUBISHI Lancer Saloon/Ffamiliar CB0AW 1.6 16V Cat 4G92 For Sale

If you happen to be in the market for getting a top notch second hand Mitsubishi engine for sale, look no further than Used Engine Finder. To be able to receive the best bargain on the best used engine for your requirements, we make it possible for you to reach out to a community of Mitsubishi engine importers & salvage yards quickly.

With Used Engine Finder, there’s no need to spend time comparing prices. We just need information regarding the engine you need, and our sellerswill respond with quotes. And because we deal directly with them, you can be sure you’re obtaining the very best price.


So don’t hold out any longer, discover your ideal engine right now along with Used Engine Finder.

  • When searching for an alternative motor, save time and money through the use of Used Engine Finder.
  • Receive quotes from several of our trustworthy engine shops.
  • The greatest prices may be obtained by working direct with engine suppliers.
  • Find motors for any and all vehicles, irrespective of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.