2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

COMPLETE ENGINE Volvo S60 II 1.5 T2 B4154T5

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

COMPLETE ENGINE Volvo S60 II 1.5 T2 B4154T5 For Sale

If you are in the marketplace for finding a good used Volvo engine for sale, simply visit Used Engine Finder. We make it easy for you to contact a database of Volvo dismantlers and engine importers immediately, to receive the greatest bargain on the ideal substitute engine.

Searching hard for an engine is not necessary merit to Used Engine Finder. Let us know what you’re looking for, and our shops get you numerous deals. And because we deal directly with them, you can be sure you’re getting the best price.


Look for your best Volvo engine using Used Engine Finder right now!

  • When searching for a replacement motor, save time as well as money through the use of Used Engine Finder.
  • Get numerous quotes from our honest traders.
  • By negotiating directly with engine manufacturers, you can be certain you’re receiving the lowest price possible.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.