2013-2015 Acura RDX 3.5L Used Engine
*Image for illustrative purposes only.

ENGINE 2010 LAND ROVER LR2 3.2L MOTOR WITH 118,000 MILES

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

ENGINE 2010 LAND ROVER LR2 3.2L MOTOR WITH 118,000 MILES For Sale

If you’re in the marketplace for finding a excellent second-hand Land Rover motor for sale, look no further than Used Engine Finder. We will allow you to quickly contact a a network of Land Rover vehicle dismantlers and engine importers, so that you can find a very good price for the ideal replacement engine for your requirements.

With Used Engine Finder, you don’t need to spend time looking around. We just require details about what you need, and our merchantswill get back to you with quotes. Our direct connection with the supplier makes sure that we are able to provide you with the perfect prices.


So do not hold out any more, discover your ideal motor right now together with Used Engine Finder.

  • Used Engine Finder will let you save time and cash by finding the right motor for your Land Rover.
  • Get deals from a number of our dependable engine shops.
  • The greatest deals may be acquired by dealing direct with engine retailers.
  • Find motors for any and all vehicles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.