2014-2015 Acura ILX Hybrid 1.5L Used Engine
*Image for illustrative purposes only.

ENGINE & TRANSMISSION MAZDA CX-9 109k miles

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

ENGINE & TRANSMISSION MAZDA CX-9 109k miles For Sale

If you are in the market for locating a quality second-hand Mazda motor for sale, take a look at Used Engine Finder. To be able to receive the greatest price on the ideal used motor for your requirements, we make it possible for you to reach out to a community of Mazda engine importers & salvage yards instantly.

Searching hard for a motor is not necessary thanks to Used Engine Finder. Merely let us know what you’re looking for and our engine suppliers will respond with multiple quotations. And since we deal directly with them, you can be sure you’re receiving the very best price.


So don’t squander any more time and utilize Used Engine Finder to locate the ideal engine for your Mazda.

  • Used Engine Finder will let you save time and money by discovering the right engine for your Mazda.
  • Get many quotes from our reliable sellers.
  • By negotiating directly with engine companies, you can be sure you’re getting the best price possible.
  • Save Time With Making Only One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.