*Image for illustrative purposes only.

GM Chevy Cobalt HHR Ecotec LNF LHU 2.0L Turbo FWD Long Block Engine

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

GM Chevy Cobalt HHR Ecotec LNF LHU 2.0L Turbo FWD Long Block Engine For Sale

It is easy to locate an superb second-hand Saab engine for sale at Used Engine Finder. We allow you to instantaneously get in touch with a network of Saab autowreckers and engine importers, so you can find a very good bargain for the best used engine to suit your needs.

There’s no need to spend time looking around when you have Used Engine Finder at your disposal. We only need information about the engine you need, and our scrap yardswill respond with quotes. And since we deal directly with them, you can be certain you’re receiving the best possible price.


So don’t waste anymore time and utilize Used Engine Finder to locate the ideal engine for your Saab.

  • Save time and cash by using Used Engine Finder to discover the perfect replacement engine.
  • Receive prices from numerous of our trustworthy engine sellers.
  • By negotiating direct with engine manufacturers, you can be sure you’re getting the lowest price achievable.
  • Find motors for any and all automobiles, regardless of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.