*Image for illustrative purposes only.

GMC Canyon Chevrolet Colorado Hummer H3 I-370 Engine 3.7L 107K MILE 2007

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

GMC Canyon Chevrolet Colorado Hummer H3 I-370 Engine 3.7L 107K MILE 2007 For Sale

It’s easy to get an excellent second-hand ISUZU engine for sale at Used Engine Finder. To be able to obtain the best bargain on the ideal used engine for your needs, we make it easy for you to reach out to a group of ISUZU engine importers & junk yards quickly.

With Used Engine Finder, you don’t need to spend time doing your research. We only need information regarding what you need, and our scrap yardswill respond with estimates. You can rest assured you’re obtaining the best price since we deal directly with them.

So don’t squander anymore time and utilize Used Engine Finder to find the ideal engine for your ISUZU.

  • Used Engine Finder may help you save time and money by locating the optimal engine for your ISUZU.
  • Get prices from numerous of our honest engine shops.
  • The best prices may be obtained by working directly with engine dealers.
  • You may find motors for just about any and all vehicles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.