*Image for illustrative purposes only.

HYUNDAI ILOAD/IMAX ENGINE PETROL, 2.4, G4KG, TQ, 11/07-05/18

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

HYUNDAI ILOAD/IMAX ENGINE PETROL, 2.4, G4KG, TQ, 11/07-05/18 For Sale

If you are in the marketplace for locating a excellent second-hand Hyundai motor for sale, look no further than Used Engine Finder. We let you instantly contact a a community of Hyundai junkyards and engine importers, so you can find the best price on the ideal replacement motor for your requirements.

Trying hard to find an engine is no longer necessary thanks to Used Engine Finder. We just require information about what you need, and our merchantswill respond with quotations. And because we deal directly with them, you can be sure you’re getting the best possible price.


Look for your best Hyundai engine using Used Engine Finder right now!

  • When searching for a better engine, save time and also money through the use of Used Engine Finder.
  • Obtain multiple estimates from our dependable traders.
  • The best deals may be acquired by dealing direct with engine dealers.
  • You may find motors for any and all vehicles here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.